Fashion Development Process
Fashion Business Insights

5 Common Mistakes Brands Make When Sending Designs to Manufacturers

Fashion SVP

Fashion Business & Manufacturing

7 Min Read

Fashion Development

You've spent weeks on the design. The sketch looks great, the colours feel right and you can already picture it on a rail. You send it to the manufacturer, hit send and wait for a perfect sample. Then the sample arrives, and it's not what you had in mind. The sleeves are too short, the colour is off, and the pocket is on the wrong side. Nine times out of ten, the factory isn't the problem. The problem is what was sent.

Getting fashion design to production right means giving the manufacturer clear, complete information. In this blog, we cover five of the most common clothing manufacturing mistakes, how they affect your collection and how to avoid them.

Clear design instructions, accurate measurements and a complete tech pack can prevent costly sampling mistakes, production delays and misunderstandings with manufacturers.

1. Sending a Fashion Sketch Instead of a Production-Ready Design

A sketch shows the mood of a garment. A manufacturer needs to know how to build it. Without technical details, even the clearest-looking illustration can leave too much room for interpretation.

What goes wrong:

  • The sketch shows the look but not the details.
  • Pattern makers have to guess how each part fits together.
  • Different people read the same sketch in different ways.
  • The first sample ends up being a test of the factory's imagination, not your design.

What to do instead:

  • Send a proper tech pack, which is the main document factories work from.
  • Include flat drawings (front, back and side) with clear lines.
  • Add close-up details for pockets, collars, cuffs and seams.
  • Keep the sketch as a mood reference, but don't rely on it alone.

Good to know: This is one of the most common fashion tech pack mistakes. A beautiful illustration is not the same as garment production specifications.

2. Leaving Measurements and Fit Details Too Open to Interpretation

"Medium" means different things to different people. Without numbers, the factory can only guess. Measurements and fit instructions need to be specific enough for the manufacturer to reproduce the garment accurately across every size.

What goes wrong:

  • No size chart, or a chart with gaps.
  • Missing points of measure, like sleeve length, chest width or rise.
  • No tolerance, so nobody knows how much variation is acceptable.
  • No base size or fit notes, such as "relaxed," "cropped" or "true to size".
  • Fit based on a model's body instead of the garment's measurements.

What to do instead:

  • Include a full size chart with clear measurements for every size.
  • State your base size and how the other sizes grade up or down.
  • Add tolerances, for example plus or minus 1 cm.
  • Explain the fit in simple words, and back it up with a reference garment if you can.
  • Share feedback from fit sessions so the next sample improves.

Why it matters: Poor fit is one of the main reasons for returns and unhappy customers. Clear fashion design specifications help the factory get it right from the first sample.

3. Not Specifying Fabrics, Trims and Colour References Clearly

"Soft cotton in navy" sounds clear until you see three different soft cottons in three different navies. Fabric and colour descriptions need to be precise because even small differences can change the final appearance, feel and quality of a garment.

What goes wrong:

  • Vague fabric names like "jersey" or "denim" with no weight, composition or finish.
  • Missing trim details, such as zip type, button size or drawcord style.
  • Colours described by name only, like "sage green".
  • Screen colours that look different on every device.
  • No mention of who supplies the fabric, you or the factory.

What to do instead:

  • Give the fabric name, composition, weight (GSM) and finish.
  • List every trim, with size, colour, material and placement.
  • Use a colour standard such as Pantone, or send a physical colour swatch.
  • Say clearly who sources what.
  • Send physical samples of fabric and trims where possible.

Tip: If you can only send one thing by post, make it the colour swatch. It saves more arguments than any email.

4. Forgetting Construction and Artwork Details

The small things are the ones that change how a garment looks, feels and lasts. Stitching, seam finishes, artwork placement and labelling might seem like minor details, but leaving them out of the production brief can lead to unexpected results.

What goes wrong:

  • No stitch types or seam finishes listed.
  • Missing details like topstitching, hem depth or pocket placement.
  • Artwork sent as a low-quality screenshot or a flattened image.
  • No information on print size, position or colours.
  • Labels, hangtags and packaging left out of the brief.
  • Care labels and fibre content forgotten until the end.

What to do instead:

  • Note how each seam should be finished.
  • Mark exact positions, with measurements, for pockets, logos, prints and embroidery.
  • Send artwork as vector files (such as AI or PDF) with colours specified.
  • Include label placement, care instructions and packaging requirements.
  • Add a "Do not" list if there are things you definitely don't want.

Why it matters: These details affect cost, quality and timing. Missing them early leads to surprise quotes and extra sample rounds.

5. Changing the Design Without Updating the Latest Version

It's easy to do. A small tweak gets agreed on a call, a WhatsApp or a quick email, but the tech pack never changes. The factory continues working from an older version while your team assumes the latest changes have already been communicated.

What goes wrong:

  • The factory works from an old file while your team is looking at a new one.
  • Several versions float around, with nobody sure which is final.
  • Changes are sent in pieces across emails, chats and calls.
  • Late updates arrive after fabric has been cut.
  • Two people in your team give the factory different instructions.

What to do instead:

  • Keep one master file and label versions clearly (for example V1, V2, V3).
  • Write a short change log at the top of each update.
  • Send all changes in the same place, in writing.
  • Ask the factory to confirm they've received and understood each update.
  • Name one person on your side to be the main contact.

Good habit: Treat your tech pack like a recipe. If the recipe changes, the whole kitchen needs the new copy.

A few extra hours spent preparing a clear production brief can save weeks of delays, unnecessary sample rounds and avoidable manufacturing costs.

How These Design Mistakes Affect Sampling and Production

Small gaps at the start tend to grow into big problems later. When manufacturers don't receive complete design information, the impact can extend beyond the first sample and affect the entire production timeline.

  • More sample rounds: Each mistake means another sample, more time and more cost.
  • Delays: Questions, corrections and waiting for answers push back launch dates.
  • Higher costs: Changes after cutting or sewing often mean wasted fabric and extra labour.
  • Quality issues: If details are unclear, they may be done differently across a bulk order.
  • Sample and bulk don't match: What you approved isn't what arrives.
  • Stress on the relationship: Misunderstandings can create frustration on both sides, which isn't good for fashion manufacturer communication.
  • Missed selling windows: Late stock can mean lost sales, especially in seasonal fashion.

The hard truth is that most of these issues were avoidable. A few extra hours on the brief can save weeks later.

What to Check Before Sending a Design to a Manufacturer

Run through this list before you hit send. It covers the essentials of clothing manufacturer design requirements and helps ensure your manufacturer has everything needed to begin development.

The Design

  • Clear flat drawings (front, back and details).
  • A full tech pack, not just a sketch.

Measurements and Fit

  • Complete size chart with points of measure.
  • Base size, grading and tolerances.
  • Fit notes and references.

Materials and Colour

  • Fabric name, composition, weight and finish.
  • Full trim list with specifications.
  • Colour references, such as Pantone codes or physical swatches.

Construction and Artwork

  • Stitch and seam details.
  • Placement of pockets, prints and embroidery.
  • Artwork in the right file format.
  • Labels, care instructions and packaging.

Version Control

  • One final file, clearly named.
  • A change log for any updates.
  • A single point of contact.

Extras That Help

  • Reference garments or physical samples.
  • Target price and quantity.
  • Deadlines for samples and delivery.

If you can tick most of these boxes, you're giving your manufacturer the best possible start.

Fashion SVP FAQ

Frequently Asked Questions

Can manufacturers work from a basic fashion sketch?

Some can, but it usually leads to guesswork and extra sample rounds. A full tech pack gives much better results.

What file format should fashion designs be sent in?

PDF is the most common for tech packs, with vector files (AI or PDF) for artwork. Ask your manufacturer if they have a preference.

Should brands send physical fabric or trim samples to manufacturers?

Yes, whenever possible. Physical swatches and trims remove a lot of guesswork, especially for colour and feel.

How many design revisions should a brand expect before sampling?

It varies, but a few rounds of clarification are normal. A detailed tech pack can reduce them a lot.

Can a manufacturer help turn an incomplete design into a production-ready garment?

Often, yes. Some offer technical design services, though this may cost extra and take more time.